Publications

updated 3/22/15

  1. D. Hendrix & R.D. Kane, “Environmental Cracking of API 5CT L80 (Type 1) Production Tubulars in No-Sour Gas Wells and the Influence of Metallurgical and Chemical Treatment”, Corrosion 2015, Paper No. C2015-5851, NACE International, Houston, TX, March 2015.
  2. R.D. Kane, “A Comprehensive Study of Titanium Alloys for High Pressure High Temperature (HPHT) Wells”, Corrosion 2015, Paper No. C2015-5512, NACE International, Houston, TX, March 2015.
  3. R.D. Kane, E. Goetheer, J. Mertens, P. Hkakharia, S. De Vroey, S. Srinivasan, “Plant Applications of Online Corrosion Monitoring: CO2 Capture Amine Plant Case Study, Corrosion 2015, Paper No. C2015-5954, NACE International, Houston, TX, March 2015.
  4. R.D. Kane, “Use of NACE TM0111 Slow Strain Rate Test for Evaluation of ethanol SCC”, Corrosion 2015, Paper No. C2015-5945, NACE International, Houston, TX, March 2015.
  5. L. Jain, B. Mishra, C. Wiliamson, D. Olson, John Spear, R. D. Kane, “Mechanistic MIC Evaluation of Line Pipe in Ethanol and Acetic Acid Solutions”, Corrosion 2015, Paper No. C2015-5708, NACE International, Houston, TX, March 2015.
  6. A. Biswas, P. Ellis, R.D. Kane, S. Srinivasan, “Laboratory Testing for SSC Resistance of Sour Service Material Relevant to HPHT Conditions”, Corrosion 2014, Paper No. C2014-4415, NACE International, Houston, TX, March 2014.
  7. R.D. Kane, S. Srinivasan, “Influence of Metallurgical Processing, Welding and Surface Treatments on Ethanol SCC of Carbon Steel”, Corrosion 2014, Paper NO. C2014-4419, NACE International, Houston, TX, March 2014.
  8. R.D. Kane, T. Anand, A. Biswas, P.F. Ellis & S. Srinivasan, “New Approach to H2S Limits for High-Pressure, High-Temperature Petroleum Production Wells, Materials Performance, NACE International, January 2014.
  9. S. Srinivasan, P. Glass, R.D. Kane, “Influence of Pipeline Welding and Pipe Manufacturing Variables on Ethanol SCC”, Eurocorr 2013, European Federation of Corrosion, Estoril Portugal, September 2013.
  10. C. Williamson, B. Mishra, D. Olson, J. Spear, R.D. Kane, L. Jain, “Microbiologically Influenced Corrosion of Linepipe Steels in Ethanol and Acetic Acid Solutions”, Corrosion 2013, Paper No. C2013-0002250, NACE International, Houston, TX, March 2013
  11. T. Anand, N.S. Meck, B. Chambers, R.D. Kane, J. Skogsberg, “Sour Service Limits for Martensitic SS: Review of Current Knowledge, Test Methods and Development”, Corrosion 2013, Paper No. C2013-0002639, NACE International, Houston, TX, March 2013
  12. B. Chambers, R.D. Kane, P. Glass, M. Yunovich, “Oxygen and Corrosion Probes – Performance and Limitations in Laboratory”, Corrosion 2013, Paper No. C2013-0002755, NACE International, Houston, TX, March 2013
  13. S. Srinivasan, P.F. Ellis II, M.M. Chauviere, R.D. Kane, “Can We Better Address CUI and Energy Loss?”, Materials Performance, NACE International, Houston, TX, January 2013, pp 52-58
  14. M. Yunovich, B. Chambers, R.D. Kane, “Surface treatments to mitigate stress-corrosion cracking of pipelines in ethanol transmission service”, Eurocorr 2012, European Federation of Corrosion, Istambul, Turkey, September 2012
  15. B. Chambers, R.D. Kane, J. Skogsberg, M. Kimura, Y. Miyata, K. Shimamoto, “Sour service limits of high strength 15Cr martensitic stainless steel tubular material”, Eurocorr 2012, European Federation of Corrosion, Istambul, Turkey, September 2012
  16. B. Chambers, S. Srinivasan, R.D. Kane, M. Blades, “Introduction to experimental methodology for evaluation of crude corrosivity – naphthenic acid and sulfidic corrosion”, Eurocorr 2012, European Federation of Corrosion, Istambul, Turkey, September 20122
  17. B.D. Chambers, S. Srinivasan, R.D. Kane, M.A. Blades, ” An Experimental Method For Evaluation of Crude Corrosivity – Naphthenic Acid And Sulfidic Corrosion of Oil Fractions”, Corrosion/2012, NACE International, Houston, TX, March 20122
  18. B. Hambers, J. Skogsberg, J. Meng, M. Kimura, R.D. Kane, K Shimamoto, “Evaluation of Environmentally Assisted Cracking Resistance of High Strength 15Cr Steel In Sour Well Environments”, Corrosion/2012, NACE International, Houston, TX, March 2012.2
  19. R.D. Kane, “Update On ESCC Case Studies And Guidelines For SCC Prevention”, Corrosion/2013, NACE International, Houston, TX, March 20122
  20. R.D. Kane and J. Burman, “Low Stress Connection Design Versus Environmental Cracking In Corrosive Well Service Conditions”, NACE Corrosion 2012, NACE International, March 2012.2
  21. A. Venkatesh, B. Chambers, R.D. Kane, J. Edmondson, “Evaluation of the influence of PWHT and threshold stresses on ethanol SCC”, Eurocorr 2011, European Federation of Corrosion, Stockholm, Sweden, September 20112
  22. J.Meng, B. Chambers, M. Yunovich, R.D. Kane, “What is Really Known About Using 13Cr Tubulars in Sour Service?”, Materials Performance, NACE International, Houston, TX, August 2011, pp 72-782
  23. >B. Chambers, R. Kane, M. Yunovich, “Implications of Temperature And Buffering Systems For Laboratory Testing of Alloy Steel And 13Cr Materials In Oil And Gas Production Environments”, Corrosion/2011, NACE International, Houston, TX, March 2011.
  24. J. Meng, J. Skogsberg, M. Kimura, R.D. Kane, K. Shimamoto, “Environmentally Assisted Cracking Testing of High Strength 15Cr Steel In Sour Well Environments”, Corrosion/2011, NACE International, Houston, TX, March 2011.2
  25. A. Venkatesh, B. Chambers, R.D. Kane, J. Edmondson, ” Ethanol SCC Research On PWHT Effects And Threshold Stress Determination”, Corrosion/2011, NACE International, Houston, TX, March 2011.2
  26. B. Chambers, V. Lagad, R. Kane, “Critical factors in rich amine solvent corrosivity”, Eurocorr 2010, European Federation of Corrosion, Moscow, Russia, September 2010.2
  27. L. Jain, C. Williamson, S. Bhola, R. Bhola, J. Spear, B. Mishra, D. Olson, R.D. Kane, 10070 Microbiological and Electochemical Evaluation of Corrosion and Microbiologically Influenced Corrosion of Steel in Ethanol Fuel Environments, Corrosion/2010, Paper No. 10070, NACE International, Houston, Texas, March 2010.2
  28. A. Venkatesh, B. Chambers, R.D. Kane and K. Kirkham, Evaluation of Stress Corrosion Cracking Behavior of Steel in Multiple Ethanol Environments, Corrosion/2010, Paper No. 10077, NACE International, Houston, Texas, March 2010.2
  29. B. Chambers, R.D. Kane, M. Yunovich, Implications of Temperature and Buffering Systems for Laboratory Testing of Alloy Steel and 13Cr Materials in Oil and Gas Production Environments, Corrosion/2011, Paper No. 11096, NACE International, Houston, Texas, March 2011.
  30. J. Meng, B. Chambers, R.D. Kane, J. Skogsberg, M. Kimura and K. Shimamoto, Environmentally Assisted Cracking Testing of High Strength 15Cr Steel in Sour Well Environments, Corrosion/2011, Paper No. 11100, NACE International, Houston, Texas, March 2011.
  31. A. Venkatesh, B. Chambers, R. Kane, Evaluation of the influence of PWHT and threshold stresses on ethanol SCC, Eurocorr/2011, Paper No. 4946, The European Corrosion Congress, Moscow, Russia, September 2010.2
  32. R.D. Kane, Corrosion: Is it a Threat to Pipelining Bioethanol? Biofuels International, London, UK, July 2011, pp 64-65.2
  33. J. Meng, B. Chambers, M. Yunovich, R.D. Kane, What is Really Known About Using 13Cr Tubulars in Sour Service, Materials Performance, NACE International, Houston, Texas, August 2011, pp 72-78.
  34. B. Chambers, S. Srinivasan, K.M. Yap and R. Kane, CORROSION IN CRUDE DISTILLATION UNIT OVERHEAD OPERATIONS: A COMPREHENSIVE REVIEW, Eurocorr 2009, Paper No. 8232, European Federation of Corrosion, Nice, France, September 2009.
  35. S. Kus, G. Bartelmus, R. KANE, A. Mehdawe, D. Kasperczyk, Corrosion in Continuous Biodegradation of Volatile Organic Compounds,  Eurocorr 2009, Paper No. 8088, European Federation of Corrosion, Nice, France, September 2009.
  36. R. Kane, J. Skogsberg, Q.J. Meng, B. Chambers, NEW EVALUATION AND QUALIFICATION PROTOCOL FOR STAINLESS STEEL TUBULARS FOR H2S/CO2 SERVICE, Eurocorr 2009, Paper No. 8065, European Federation of Corrosion, Nice, France, September 2009.
  37. B. Chambers, Q.J. Meng, AUTOMATED INHIBITOR EVALUATION FOR MULTIPHASE ACID GAS APPLICATIONS USING A STANDARDIZED PROCEDURE, Corrosion 2009, Paper 09567, NACE International, March 2009.
  38. I. Palmieri Baptista, P. Altoe Ferreira, G. S. Pimenta, R. Kane and E. Trillo, PROPOSED STANDARD TEST METHOD FOR ETHANOL SCC OF STEEL, Corrosion 2009, Paper 09534, NACE International, March 2009.
  39. D. McIntyre, R. Kane and A. Venkatesh, SCC BEHAVIOR OF STEEL IN FUEL ETHANOL AND BUTANOL, Corrosion 2009, Paper 09530, NACE International, March 2009.
  40. R. Kane and S. Papavinasam, CORROSION AND SCC ISSUES IN FUEL ETHANOL AND BIODIESEL, Corrosion 2009, Paper 09528, NACE International, March 2009.
  41. S. Srinivasan, V. Lagad and R. Kane, EVALUATION OF PREDICTION TOOL FOR SOUR WATER CORROSION,QUANTIFICATION AND MANAGEMENT IN REFINERIES, Corrosion 2009, Paper 09337, NACE International, March 2009
  42. A. Venkatesh and R. Kane, Fracture Analysis of Slow Strain Rate Test for Stress Corrosion Cracking, Corrosion 2009, Paper 09296, NACE International, March 2009.
  43. R. Kane, B. Craig and A. Venkatesh, TITANIUM ALLOYS FOR OIL AND GAS SERVICE: A REVIEW, Corrosion 2009, Paper 09078, NACE International March, 2009.
  44. B. Chambers and R. Kane,  Refining high acid crudes: when is an opportunity not an opportunity?, Eurocorr 2008, Aberdeen, Scotland, European Federation of Corrosion, September 8-11, 2008.
  45. V. Lagad, S. Sridhar,  R. Kane, FACILITATING INTERNAL CORROSION DIRECT ASSESSMENT USING ADVANCED FLOW AND CORROSION PREDICTION MODELS, Corrosion 2008, NACE International, Houston, TX, March 2008
  46. Reliability with On-line Corrosion Monitoring & Modeling, Corrosion 2008, NACE International, Houston, TX, March 2008
  47. J. Hernandez, R. Kane, K. Briegel, R. Clark, REAL-TIME, ONLINE CORROSION MONITORING & PROCESS OPTIMIZATION THROUGH THE CHEMICAL PLANT CONTROL SYSTEM, Corrosion 2008, NACE International, Houston, TX, March 2008
  48. R. Kane and P. Quiroga, EVALUATION OF SSC RESISTANCE OF ‘SWEET’ MATERIALS IN H2S ENVIRONMENTS FOR DEVELOPMENT OF BALLOT GUIDELINES IN MR0175/ISO 15156, Corrosion 2008, NACE International, Houston, TX, March 2008
  49. R. Kane, M. Chauviere, K. Chustz, EVALUATION OF STEEL AND TSA COATING IN A CORROSION UNDER INSULATION, (CUI) ENVIRONMENT, Corrosion 2008, NACE International, Houston, TX, March 2008
  50. S. Srinivasan, R. Kane, D. Moore, Prediction System for Sour Water Corrosion Quantification and Management in Refineries, Eurocorr 2007, European Corrosion Congress, Freiburg, Germany, September 2007
  51. S. Srinivasan, V. Lagad, R. Kane, Internal Corrosion Assessment for Dry Gas and Multiphase Pipelines using Corrosion Prediction Models, Eurocorr 2007, European Corrosion Congress, Freiburg, Germany, September 2007
  52. R. D. Kane, A New Approach to Corrosion Monitoring, Corrosion Engineering, Vol. 114, no. 6, pp. 34-41. June 2007
  53. E. Trillo, R. Kane, A. Ethridge, R. Clements, Corrosion Fatigue Testing of Armor Wire Materials in Subsea Environments, Corrosion 2007, NACE International, Houston, TX, March 2007
  54. P. Rhodes, L. Skogsberg, R. Schofield, R. Kane, E. Trillo, EFFECT OF HIGH PRESSURE METHANE ON STRESS CORROSION SUSCEPTIBILITY OF CASING STEELS, Corrosion 2007, NACE International, Houston, TX, March 2007
  55. R. Kane, D.C. Eden, S. Amidi, D. Delve, IMPLEMENTATION OF REAL-TIME CORROSION MONITORING WITH INDUSTRIAL PROCESS CONTROL & AUTOMATION, Corrosion 2007, NACE International, Houston, TX, March 2007
  56. P. Rhodes, L. Skogsberg, W. Grimes, R. Kane, E. Trillo, EVALUATION OF FITNESS-FOR-PURPOSE TEST ENVIRONMENTS FOR SULFIDE STRESS CRACKING TESTS OF CASING STEELS, Corrosion 2007, NACE International, Houston, TX, March 2007
  57. R. Kane, J. Maldonado, P. Moore, FULL SCALE TESTING OF PIPE CONTAINING SURFACE IMPERFECTIONS IN H2S AND NON-H2S ENVIRONMENTS, Corrosion 2006, NACE International, Houston, TX, March 2006
  58. M. Cayard, W. Giesbrecht, R. Horvath, R. Kane, V. Lagad, PREDICTION OF AMMONIUM BISULFIDE CORROSION AND VALIDATION WITH REFINERY PLANT EXPERIENCE, Corrosion 2006, NACE International, Houston, TX, March 2006
  59. R. Horvath, M. Cayard, R. Kane, PREDICTION AND ASSESSMENT OF AMMONIUM BISULFIDE CORROSION UNDER REFINERY SOUR WATER SERVICE CONDITIONS, Corrosion 2006, NACE International, Houston, TX, March 2006
  60. E. Trillo, R. Kane, M. Maligas, M. Coles, E. Turbeville, OPERATIONAL LIMITS FOR AUSTENITIC STAINLESS STEELS IN H2S-CONTAINING ENVIRONMENTS, Corrosion 2006, NACE International, Houston, TX, March 2006
  61. E. Trillo, R. Kane, J. McKennis, K. Shimamoto, TEST PROTOCOL DEVELOPMENT AND ELECTROCHEMICAL MONITORING OF STAINLESS STEELS IN PACKER FLUID ENVIRONMENTS, Corrosion 2006, NACE International, Houston, TX, March 2006
  62. R. Kane, N. Sridhar, M. Brongers, J. Beavers, A.  Agrawal, L. Klein, Stress Corrosion Cracking in Fuel Ethanol: A Recently Recognized Phenomenon, Materials Performance. Vol. 44, no. 12, pp. 50-55. Dec. 2005
  63. R.D. Kane, Rouging …The phenomenon and its control in high purity water systems, Ultrapure Water, Tall Oaks Publishing, Littleton CO, December 2005.
  64. R. Kane, E. Trillo, J. McKennis, K. Shimamoto, Evaluation Protocol and Monitoring of Corrosion and SCC of Stainless Steels in Clear Brine Fluids, Eurocorr 2005, European Corrosion Congress, Lisbon, Portugal, September 2005
  65. B. Covino, Jr., S. Bullard, S. Cramer, G. Holcomb, M. Ziomek-Moroz, R. Kane, B. Meidinger, Detecting Internal Corrosion of Natural Gas Transmission Pipelines: Field Tests of Probes and Systems for Real-time Corrosion Measurement, Eurocorr 2005, European Corrosion Congress, Lisbon, Portugal, September 2005
  66. D.C. Eden, D.A. Eden, R. Kane, Take corrosion monitoring on-line, Chemical Processing. Vol. 68, no. 8, pp. 37-41. Aug. 2005
  67. D.C. Eden, D.A. Eden, R.D. Kane, M.S. Cayard and D.T. McLean, Making Sense of Sensors – Electrochemical Monitoring in Difficult Environments, Corrosion 2005, Paper No. 05374, NACE International, Houston, Texas, April 2005.
  68. J.G. Maldonado, E.A. Trillo, M.S. Cayard and R.D. Kane,  Serviceability of Coiled Tubing in Corrosive Workover and Production Environments, Corrosion 2005, Paper No. 05109 NACE International, Houston, Texas, April 2005.
  69. S. Srinivasan, V. Lagad and R.D. Kane, Automating Evaluation and Selection of Corrosion Resistant Alloys for Oil and Gas Transmission and Production, Corrosion 2005, Paper No. 05054, NACE International, Houston, Texas, April 2005.
  70. B.S. Covino, Jr., S.J. Bullard, S.D. Cramer, G.R. Holcomb, and M. Ziomek-Moroz (USDOE), R.D. Kane and D.C. Eden (InterCorr),  B. Meidinger (RMOTC), Electrochemical Corrosion Rate Sensors for Detecting Internal Corrosion on Natural Gas Pipelines, Corrosion 2005, Paper No. 05133, NACE International, Houston, Texas, April 2005.
  71. S.J. Bullard, B.S. Covino, Jr., S.D. Cramer, G.R. Holcomb, and M. Ziomek-Moroz (USDOE), M.S. Cayard and R.D. Kane (InterCorr),  B. Meidinger (RMOTC), Electrochemical Noise Monitoring in Natural Gas Production Plants, Corrosion 2005, Paper No. 05359 NACE International, Houston, Texas, April 2005.
  72. R.D. Kane and D.A. Eden, ELECTROCHEMICAL MONITORING OF CORROSION IN SOUR SYSTEMS: FACT AND FICTION OF ELECTRODE BRIDGING, FOULING AND OTHER HORROR STORIES, Corrosion 2005, Paper No. 05637, NACE International, Houston, Texas, April 2005.
  73. J. Mougin, M.S. Cayard, R.D. Kane, B. Ghys, C. Pichard, Sulfide Stress Cracking and Corrosion Fatigue of Steels Dedicated to Bottom Hole Assembly Components, Corrosion 2005, Paper No. 05085, NACE International, Houston, Texas, April 2005.
  74. R.D. Kane, D.C. Eden, D.A. Eden and E.A. Trillo, “Improving Reliability of Gas Handling and Processing Equipment through On-line, Real-time Corrosion and Process Control Technology, Annual Conference Proceedings, Gas Processors Association, Tulsa OK, March 2005.
  75. R.D. Kane, D.C. Eden and D.A. Eden, “Real-Time Solutions Integrate Corrosion Monitoring with Process Control, Materials Performance, NACE International, Feb 2005, pp 36-41.
  76. B.S. Covino, Jr., S.J. Bullard, S.D. Cramer, G.R. Holcomb, and M. Ziomek-Moroz (USDOE), M.S. Cayard and R.D. Kane (InterCorr),  B. Meidinger (RMOTC), FIELD TESTS OF PROBES FOR DETECTING INTERNAL CORROSION OF NATURAL GAS TRANSMISSION PIPELINES, Natural Gas Technologies 2005 Conference, Gas Technology Institute, Orlando, FL, Jan-Feb 2005.
  77. Russell D. Kane, D.C. Eden, M. S. Cayard, D.A. Eden, D.T. Mclean, On-Line, Real-Time Monitoring For Petrochemical and Pipeline Process Control Applications, Eurocorr 2004, Paper No. 367, European Federation of Corrosion, Nice France, Sept 2004
  78. J.G. Maldonado, J.W. Skogsberg and R.D. Kane, Cracking Susceptibility of Duplex Stainless Steel in the Presence of H2S-Containing Environments at an Intermediate Temperature, Eurocorr 2004, Paper No. 380, European Federation of Corrosion, Nice France, Sept 2004
  79. R.D. Kane and S. Campbell, Real-Time Corrosion Monitoring of Steel Influenced by Microbial Activity (SRB) under Controlled Seawater Injection Conditions, Eurocorr 2004, Paper No. 366, European Federation of Corrosion, Nice France, Sept 2004
  80. R.D. Kane, D.C. Eden, M. S. Cayard, D.A. Eden & D.T. Mclean, Online Corrosion Monitoring for Process Control and Asset Management, Plenary Lecture, Scandinavian Corrosion Congress, Reykjavik, Iceland, April 2004.
  81. R.D. Kane and M.S. Cayard, Corrosion Combat (A discussion of sour water corrosion and new developments to help prevent it), Hydrocarbon Processing, March 2004, pp 87-91
  82. J. Tinnea, B.S. Covino, S.J. Bullard, B.R. Isaac, S. White, R.D. Kane, D.C. Eden and D.A.Eden, Electrochemical Techniques: Investigation of Corrosion in a Major Metropolitan Wastewater Treatment Facility. Corrosion/2004, Paper No. 04435, NACE International, Houston, Texas, March 2004.
  83. V. Lagad, S. Srinivasan, and R.D. Kane, Software System for Automating Internal Corrosion Direct Assessment of Pipelines, Corrosion/2004, Paper No. 04197, NACE International, Houston, Texas, March 2004.
  84. R.D. Kane and S. Campbell, Real-Time Corrosion Monitoring of Steel Influenced by Microbial Activity (SRB) in Simulated Seawater Injection Environments, Corrosion/2004, Paper No. 04579, NACE International, Houston, Texas, March 2004.
  85. R.D. Kane and E. Trillo, Evaluation of Multiphase Environments for General and Localized Corrosion, Corrosion/2004, Paper No. 04656, NACE International, Houston, Texas, March 2004.
  86. R.D. Kane, J.G. Maldonado and L. J. Klein, Stress Corrosion Cracking in Fuel Ethanol: A Newly Recognized Phenomenon, Corrosion/2004, Paper No. 04543, NACE International, Houston, Texas, March 2004.
  87. R.D. Kane, D.C. Eden, M. S. Cayard, D.A. Eden & D.T. McLean, Real-Time, On-Line Monitoring for Petroleum Pipeline and Petrochemical Process Control Applications, 10th Middle East Corrosion Conference, NACE International, March 2004.
  88. R.D. Kane & S. Campbell, Real-Time Corrosion Monitoring of Steel Influenced by Microbial Activity (SRB) in Simulated Seawater Injection Environments, 10th Middle East Corrosion Conference, NACE International, March 2004.
  89. R.D. Kane, D.C. Eden, M. S. Cayard, D.A. Eden & D.T. Mclean, Online Corrosion Monitoring for Process Control and Asset Management, 10th Middle East Corrosion Conference, NACE International, March 2004.
  90. Julio Maldonado, Russell D. Kane, Dawn Eden, Sridhar Srinivasan, Modeling & Monitoring Tools Provide Pipeline Assessment, Reliability and Integrity, Eurocorr/2004, European Federation of Corrosion, Budapest, Hungary, October, 2003.
  91. R.D. Kane, E.Trillo and J.G. Maldonado, Naphthenic Acid Corrosion: Roles of Velocity, Alloying, Tan And Sulfur Species, Eurocorr/2004, European Federation of Corrosion, Budapest, Hungary, October, 2003.
  92. R.D. Kane, M.S. Cayard and J.G. Maldonado, Technology for Improving Pipeline Integrity: Online, Real-Time Corrosion Monitoring, Eurocorr/2004, European Federation of Corrosion, Budapest, Hungary, October, 2003.
  93. R.D. Kane, D.C. Eden, D.A. Eden and S. Srinivasan, Process Control Improves Integrity“, World Pipelines, July-August, 2003.
  94. C.T. Savell, R. Baboian, R.D. Kane, P. Ault, I.C. Handsy, G. Nunns, P. Mosna, M. Borsotto, “Intelligent Agents for Corrosion Prevention in New Vehicle Design”, Corrosion/2003, Paper No. 03218, NACE International, Inc., Houston, Texas, March 2003.
  95. R.D. Kane, D.A. Eden, D.C. Eden, “Online, Real-Time Corrosion Monitoring For Improving Pipeline Integrity – Technology And Experience”, Corrosion/2003, Paper No. 03175, NACE International, Inc., Houston, Texas, March 2003.
  96. R.D. Kane, D.A. Eden, D.C. Eden, “Evaluation Of Potable Water Corrosivity Using Real Time Monitoring Methods”, Corrosion/2003, Paper No. 03271, NACE International, Inc., Houston, Texas, March 2003.
  97. S. Srinivasan, R.D. Kane, J.W. Skogsberg, “Automated Materials Selection and Equipment Specification System for Oil and Gas Production: Concept, Development, Implementation”, Corrosion/2003, Paper No. 03134, NACE International, Inc., Houston, Texas, March 2003.
  98. R.D. Kane, “A Comprehensive Join Industry Study on Naphthenic Acid Corrosion”, Paper 786, 15th International Corrosion Congress, Granada, Spain, Sept. 2002.
  99. R.D. Kane, “Online, Real-Time Corrosion Monitoring of Hydrocarbon Pipeline, Plants and Facilities – Development & Experience”, Paper 785, 15th International Corrosion Congress, Granada, Spain, Sept. 2002.
  100. R.D. Kane and S. Srinivasan, “Impact of Computer and Internet Technologies on Corrosion Engineering” (Session Invited Keynote Lecture), Paper 784, 15th International Corrosion Congress, Granada, Spain, Sept. 2002.
  101. R.D. Kane, “Manage Corrosion, Integrity Online”, HART’s E&P, May 2002, pp 59-61.
  102. R.D. Kane and M.S. Cayard, “A Comprehensive Study on Naphthenic Acid Corrosion”, Paper No. 02555, Corrosion/2002, NACE International, Inc., Houston, Texas March 2002.
  103. R.D. Kane, David Eden and Dawn Eden, “Online, Real-Time Corrosion Monitoring Of Hydrocarbon Pipelines – Field Experience”, NACE Northern Area Western Conference, NACE International, Inc. Edmonton, Alberta, Feb. 2002.
  104. R.D. Kane, M.S. Cayard, “Remediation and Repair Techniques for Wet H2S Cracking”, Eurocorr 2001, Riva del Garda, Sept 30 – October 2002.
  105. R.D. Kane and M.S. Cayard, “Fracture Resistance of HIC Damaged Steels”, Eurocorr 2001, Riva del Garda, Sept 30 – October 2002.
  106. M.S. Cayard and R.D. Kane, “Evaluation of Pressure Vessel Plate Steels for SOHIC Resistance”, Eurocorr 2001, Riva del Garda, Sept 30 – October 2002.
  107. R.D. Kane, “Online Resources Help Plants Fight Corrosion: Using the Internet as a learning tool”, Chemical Processing, p 26, May 2001
  108. R.D. Kane, M.S. Cayard, S. Srinivasan, R.J. Horvath, Assessment of Corrosivity in Refinery Sour Water Systems, Eurocorr/2000, Institute of Materials, London, UK, September, 2000
  109. S,W, Dean, J,G, Maldonado, R.D. Kane, “Cyclic Strain Cracking of Stainless Steels in Hot Steam-Hydrocarbon Reformer Condensates: Test Method Development”, Environmentally Assisted Cracking: Predictive Methods for Risk, STP 1401, ASTM International, West Conshohoken, PA (2000).
  110. C. M. Menendez, H. R. Hanson, R. D. Kane, “Assessment of Short Term Laboratory Techniques to Develop Offshore Cathodic Protection Guidelines”, Corrosion/2000, NACE International, Orlando, Florida, March 2000.
  111. C. Menendez, R. D. Kane, “Monitoring Hydrogen Damage in Pipelines and Pressure Vessels”, Corrosion/2000, NACE International, Orlando, Florida, March 2000.
  112. R. D. Kane, J. G. Maldonado, J. G. Ashbaugh, “Cracking Down on Corrosion”, Chemical Engineering, March 2000
  113. R. D. Kane, “Testing for Environmentally Assisted Cracking”, Uhlig’s Corrosion Handbook, second edition, 2000.
  114. M. S. Cayard, R. D. Kane, C.J. Joia, “Hydrogen Flux Monitoring Devices in Wet H2S Service, Petroleum Technology quarterly, Summer 1999
  115. R. D. Kane, M. S. Cayard, “Understanding Critical Fctors that Influence Refinery Crude Corrosiveness”, Materials Performance, NACE International, July 1999
  116. S. Srinivasan, R. D. Kane, “Corrosion prediction Models Need to Include Fields, Lab Data”, Pipe Line & Gas Industry, June 1999.
  117. R. D. Kane, M.S. Cayard, H. Hanson, “Corrosion and Materials Challenges for Deep Water Oil and Gas Production”, Corrosion Control for Marine Structures and Pipelines, Colorado School of Mines, February 9-11, 1999
  118. J. G. Maldonado, M. S. Cayard, R. D. Kane, “Results of Industry Experience Survey on Coiled Tubing Uses and Failures”, Corrosion/99, NACE International, San Antonio, Texas, April, 1999
  119. R. D. Kane, “Pick the Right Materials for Wet Oxidation”, Chemical Engineering Process, March 1999
  120. S. Srinivasan, R. D. Kane, “Experimental Simulation of Multiphase CO2/H2S Systems”, Corrosion/99, NACE International, San Antonio, Texas, April, 1999
  121. R. D. Kane, M.S. Cayard, “NACE Committee Report 8×294: Review of Published Literature on Wet H2S Cracking”, Corrosion/99, NACE International, San Antonio, Texas, April, 1999
  122. R.D. Kane, C. Joia, P. Bererra, ”Behavior of Thermal Spray Aluminum Coating in Wet H2S Environments”, Corrosion/99, NACE International, San Antonio, Texas, April, 1999
  123. R. D. Kane, M.S. Cayard, “Assess Crude Oil Corrosivity”, Hydrocarbon Processing, October 1998
  124. M. S. Cayard, R. D. Kane, C.J.B.M. Joia, L. Correia, “Methodology for the Application of Hydrogen Flux Monitoring Devices to Assess Equipment Operating in Wet H2S Service”, ASME ETCE ’99, Houston, Texas, Feb. 1-3, 1999
  125. M. S. Cayard, R. D. Kane, “Fitness-For-Service Methodologies for the Assessment of Equipment Containing Corrosion Induced Damage”, Satillo, Mexico, November 4-6, 1998
  126. C. Menendez, H. Hanson, R. D. Kane, G. Farquhar, “Cathodic Protection Requirement for Deep Water Systems”, ASTM, September 1998
  127. R. D. Kane, M.S. Cayard, “Selection of Corrosion Monitoring Methods for Chemical Plant Applications”, Chemical Engineering Process, October 1998
  128. C. Menendez, H. Hanson, R. D. Kane, “Cathodic Protection Requirements for Deep Water Systems, LatinCorr ’98, Cancun, Mexico,
  129. R. D. Kane, “Use of Portable Monitoring Units to Assess Microbal Activity, Corrosion and Souring in Water Handling & Injection Systems”, LatinCorr ’98, Cancun, Mexico,
  130. R. D. Kane, J. Maldonado, “Rapid Screening of Stainless Steels for Environmental Cracking”, LatinCorr ’98, Cancun, Mexico,
  131. R. D. Kane, M. S. Cayard, “Roles of H2S in the Corrosion and Embrittlement of Engineering Materials”, LatinCorr ’98, Cancun, Mexico,
  132. R. D. Kane, “High Temperature Crude Oil Corrosivity Prediction”, LatinCorr ’98, Cancun, Mexico,
  133. M.S. Cayard, R. D. Kane, “Methodology for the Application of Hydrogen Flux Monitoring Devices to Assess Equipment Operating in Wet H2S Service”, LatinCorr ’98, Cancun, Mexico,
  134. M.S. Cayard, R. D. Kane, “Methodology for the Application of Hydrogen Flux Monitoring Devices to Assess Equipment Operating in Wet H2S Service”, Eurocorr ’98 Conference, The Netherlands, July, 1998
  135. S. Srinivasan, R. D. Kane, “Experimental Simulation of Multiphase Flow for Assessing System Corrosivity”, Eurocorr ’98 Conference, The Netherlands, July, 1998
  136. R.D. Kane, M.S. Cayard, S. Srinivasan, “Assessment of Flow Induced Corrosivity in Petroleum Environments: Upstream and Downstream Service”, Eurocorr ’98 Conference, The Netherlands, July, 1998
  137. R. D. Kane, M. S. Cayard, “Assessment Tools for Crude Oil Corrosivity Prediction”, Eurocorr ’98 Conference, The Netherlands, July, 1998
  138. R. D. Kane, D. Abayarathna, “Corrosivity Assessment of Sour Acid Gas and Paraffin Oil Flow Line Using Simulated Multiphase Environment Tests”, Harts Petroleum Engineering International, October, 1997.
  139. S. Srinivasan, R. D. Kane, “Predict: An Integrated Model for Corrosivity Prediction and Risk Assessment in Multiphase Systems Containing CO2 & H2S”, Eurogas ’98 Conferences, April 1998.
  140. R. D. Kane, M.S. Cayard, S. Srinivasan, “NACE MR0175-Sulfide Stress Cracking Resistant Metallic Materials: Past, Present and Future”, Eurogas ’98 UK Conferences, April, 1998
  141. R. D. Kane, M.S. Cayard, “Roles of H2 and H2S in Behavior of Engineering Alloys in Petroleum Applications”, CIM Canada Conference, 1998
  142. R.D. Kane, S. Tebbal, M.S. Cayard, H. Hanson, “Materials and Corrosion Technology For Deep Water Oil and Gas Production”, Materials Performance, April 1998.
  143. R. D. Kane, “Roles of H2S in the Behavior of Engineering Alloys”, Corrosion/98, Paper No. 98274, NACE International, San Diego, CA, March 1998.
  144. M.S. Cayard, R. D. Kane, “Serviceability of 13Cr Tubulars in Oil and Gas Production Environments”, Corrosion/98, NACE International, San Diego, March 1998.
  145. S. Srinivasan, R.D. Kane, “Critical Issues in Predicting Corrosivity of Multiphase CO2/H2S Systems”, 8th Middle Eastern Corrosion Conference, Bahrain, May 1998
  146. S. Tebbal, R. D. Kane, “Development of Non-Toxic Corrosion Inhibitor for MEA Plants”, Corrosion/98, Paper No. 98410, NACE International, San Diego, CA, March 1998.
  147. M.S. Cayard, R. D. Kane, “Methodology for the Application of Hydrogen Flux Monitoring Devices to Assess Safety Margins on Equipment Operating in Wet H2S Service”, Corrosion/98, NACE International, San Diego, CA, March 1998.
  148. S. Tebbal, R.D. Kane, “Assessment of Crude Oil Corrosivity”, Corrosion/98, Paper No. 98578, NACE International, San Diego, CA, March 1998
  149. S. Tebbal, R.D. Kane, “Materials Selection in Hydrothermal Oxidation Processes”, Corrosion/98, Paper No. 98413, NACE International, San Diego, CA, March 1998
  150. S. Tebbal, R. D. Kane, “Crude Corrosivity Prediction”, ACS Symposium on Acidity in Crude Oil, Dallas, Texas, March 1998
  151. R. D. Kane, S. Tebbal, M. S. Cayard, H. Hanson, “Corrosion and Materials Challenges for Deep Water Oil and Gas Production,” Deep Water Technology Symposium, Houston, Texas, December 1997.
  152. R. D. Kane, D. Abayarathna, G. Farquhar, “Prediction of Corrosion Inhibitor Performance for a North Sea Pipeline Using Lab Simulation”, IAPG Conference, Buenos Aires, Argentina, 1997.
  153. R. D. Kane, D. Abayarathna, “Safe Use Limits for Stainless alloys in Oil and Gas Production Environments”, Duplex Stainless Steels ’97 Conference, The Netherlands, October, 1997
  154. R. D. Kane, “The Use of Temperature Scan Testing for the Evaluation of Stainless Alloys”, Duplex Stainless Steels ’97 Conference, The Netherlands, October, 1997.
  155. R. D. Kane, S. Srinivasan, S. Tebbal, “Assessment of Flow Induced Corrosivity in Petroleum Environments:  Upstream and Downstream Service”, 10 Asia Pacific Corrosion Control Conference, Indonesia, October 1997.
  156. M.S. Cayard, R. D. Kane, “Serviceability of 13Cr Tubulars in Oil and Gas Production Environments”, 10 Asia Pacific Corrosion Control Conference, Indonesia, October 1997.
  157. S. Srinivasan, R. D. Kane, “An Overview of Materials and Corrosion Resources on the Internet”, 10 Asia Pacific Corrosion Control Conference, Indonesia, October 1997.
  158. R. D. Kane, P. Surinach, “A Field Study of Microbiological Growth, Corrosion and Reservoir Souring Using Portable Equipment”, Corrosion Management, August /September 1997.
  159. R.D. Kane, G. Farquar, D. Sanders, “Performance of 12Cr-4Ni in Simulated Moderately Sour Production  Environments”, Corrosion Prevention and Control.
  160. S. Srinivasan, V. Jangama, R. D. Kane, “Prediction of Corrosivity of Multiphase CO2/H2S Systems, Eurocorr 97, Trondheim, Norway, September 1997.
  161. M.S. Cayard, R.D. Kane, Servicability of 13CR Tubulars in Oil and Gas Production Environments”, Eurocorr 97, Trondheim, Norway, September 1997.
  162. R.D. Kane, D. Abayarathna, G. Farquhar, D. Sanders, “Prediction of Corrosion Inhibitor Performance for a North Sea Pipeline Using Laboratory Simulation, Argentina Oil and Gas Expo. 1997, Buenos Aires, September 1997
  163. R.D. Kane, “Selection of Corrosion Monitoring Methods for Refinery Applications, Argentina Oil and Gas Expo. 1997, Buenos Aires, September 1997
  164. S. Srinivasan, R.D. Kane, “A Generic Framework for Solving Corrosion and Materials Problems: Case Studies”, Argentina Oil and Gas Expo. 1997, Buenos Aires, September 1997.
  165. R.D. Kane, “The Deep Water Mini-Boom – New Corrosion Challenges & Solutions, NACE Houston Section, May 1997.
  166. R.D. Kane, C.J.B.M. Joia, A.L.L.T. Small, J.A.C. Ponciano, “Rapid Screening of Stainless Steels for Environmentally Assisted Cracking in H2S/CO2/Cl- Environments Using the Slow Strain Rate Test”, Materials Performance, September 1997.
  167. S. Tebbal, R.D. Kane, J. Hau, E. Mirabal, “Critical Factors Affecting Crude Corrosivity”, Petroleum Technology Quarterly, Spring 1997.
  168. R.D. Kane, M.S. Cayard, “Corrosion-Induced Damage Raises Serious Implications’, Pipeline & Gas Journal, June 1997.
  169. D. Abayarathna, R. D. Kane, Definition of Safe Use Limits for Use of Stainless Alloys in Petroleum Production”, Corrosion/97, Paper No. 34 NACE International, Houston, Texas, March 1997
  170. R.D. Kane, “ASTM G146-Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High Pressure, High Temp. Refinery Hydrogen Service”, API Meeting, San Diego, April 1997
  171. M.S. Cayard, R.D. Kane, “Large-Scale Wet Hydrogen Sulfide Cracking Performance: Evaluaion of Metallurgical, Mechanical, and Welding Variables, Corrosion Journal, March 1997
  172. M.S. Cayard, R.D. Kane, D.L.Cooke, “An Exploratory Examination of the Effect of SOHIC Damage on the Fracture Resistance of Carbon Steels”, Corrosion/97, Paper No. 25, NACE International, Houston, Texas, March 1997
  173. M.S. Cayard, R.D. Kane, “Evaluation of Various Methods of Reducing the Duration of SSC Qualification Testing”, Corrosion/97, Paper No. 57, NACE International, Houston, Texas, March 1997
  174. P. Surinach, R.D. Kane, “A Field Study of Microbiological Growth and Reservoir Souring”, Corrosion/97, Paper No. 8, NACE International, Houston, Texas, March 1997
  175. R.D. Kane, M.S. Cayard, S. Tebbal, M. Prager, “New Test Specimen and Methodology for Evaluation of Steels for Resistance to SOHIC”, Corrosion/97, Paper No. 51, NACE International, Houston, Texas, March 1997
  176. R.D. Kane, D. Abayrathna, and P.A. Ferriera, “Corrosivity Assessment of Sour Acid Gas And Parrafin Oil Flow Lines Using Simulated Multiphase Environment Tests”, Corrosion/97, Paper No. 3, NACE International, Houston, Texas, March 1997
  177. R.D. Kane, G. Farquhar, D. Sanders, “Performance of 12Cr-4Ni in Simulated Moderately Sour Production Environments”, Corrosion/97, Paper No. 29, NACE International, Houston, Texas, March 1997
  178. C.J.B.M. Joia, A.L.L.T. Small, J.A.C. Ponciano, R.D. Kane, “Rapid Screening of Stainless Steels for Environmentally Assisted Cracking in H2S/CO2/Cl- Environments Using the Slow Strain Rate Test”, Corrosion/97, Paper No. 29, NACE International, Houston, Texas, March 1997
  179. R. D. Kane, M.S. Cayard, S. Srinivasan, “Prediction and Assessment of Corrosion in Industrial Operations”, CORCON 1997, Mumbai, December 3-6, 1997
  180. M.S. Cayard, R. D. Kane, “Serviceability of 13Cr Tubulars in Oil and Gas Production Environments”, India Corrosion Conference, December 1997.
  181. M. S. Cayard, R. D. Kane, “An Exploratory Examination of the Effect of SOHIC on the Fracture Resistance of Carbon Steels”, Corrosion/97, NACE International T8 Symposium, March 1997.
  182. R. D. Kane, “ASTM G142-96: New Standard for Determination of Hydrogen Embrittlement Susceptibility”, ASTM H2 Workshop, November 1996.
  183. S. Tebbal, R. D. Kane, “Methodologies for Assessment of Crude Oil Corrosivity in Petroleum Refining”, 2nd Arabian Corrosion Conference, Kuwait, October 1996.
  184. R. D. Kane, “Relevance of Laboratory Corrosion Tests”, Materials Performance, October 1996 (Condensation of NACE Corrosion/96 Plenary Lecture)
  185. S.Srinivasan, R.D. Kane, “Corrosivity Prediction for CO2/H2S Production Environments”, 2nd Arabian Corrosion Conference, Kuwait, October, 1996
  186. R.D. Kane, “Relevance of Laboratory Corrosion Tests in Corrosivity Assessment and Materials Selection: Case Studies”, 2nd Arabian Corrosion Conference, Kuwait, October, 1996 (Plenary Lecture)
  187. M. Cayard (plenary lecture), R. D. Kane, “Serviceability of Coiled Tubing for Sour Oil and Gas Wells”, 2nd NACE Latin American Corrosion Congress, Rio de Janeiro Brasil, Sept., 1996.
  188. S. Srinivasan, R.D. Kane, “Materials and Corrosion Resources on the Internet”, 2nd NACE Latin American Corrosion Congress, Rio de Janeiro Brasil, September, 1996
  189. L.C. Kaley, K.C. Van Scyoc, M. Prager, M.S. Cayard and R.D. Kane, “Research Report on Ultrasonic Characterization and Monitoring of Cracking in Wet H2S Service”, ASME Pressure Vessel and Piping Conference, Montreal Canada, July 1996
  190. L.C. Kaley, K.C. Van Scyoc, M. Prager, M.S. Cayard and R.D. Kane, “Acoustic Emission Characterization of Cracking in Wet H2S Service”, ASME Pressure Vessel and Piping Conference, Montreal Canada, July 1996
  191. R.D. Kane, “Corrosion in High Density Packer Fluids at High Temperatures”, Corrosion/96, Paper No. 66, NACE International, Houston, Texas, March 1996
  192. S.Srinivasan, R. D. Kane, “Prediction of Corrosivity of CO2/ H2S Production Environments”, Corrosion / 96, Paper No. 11, NACE International, Houston, Texas, March 1996.
  193. S. Tebbal, R. D. Kane, “Review of Critical Factors Affecting Crude Corrosivity”, Corrosion/96, Paper No. 607, NACE International, Houston, Texas, March 1996
  194. R.D. Kane, “Corrosion in High Density Packer Fluids at High Temperatures”, Corrosion/96, Paper No. 66, NACE International, Houston, Texas, March 1996
  195. R. D. Kane, D. Abayarathna, M. S. Cayard, “Monitoring of Wet H2S Systems Using Hydrogen Flux Measurements, Corrosion/96, NACE International T-3T-6 Task Group, March 1996.
  196. R.D. Kane, “Relevance of Laboratory Corrosion Tests in Corrosivity Assessment and Materials Selection: Case Studies”, Corrosion/96, NACE International, Houston, Texas, March 1996 (NACE Corrosion/96 Plenary Lecture).
  197. S. Srinivasan and R.D. Kane, “Corrosivity Prediction in CO2/H2S Production Environments”, Seventh Middle East Corrosion Conference, NACE International / Bahrain Society of Engineers, Manama, Bahrain, Feb. 1996 (Plenary Lecture).
  198. S. Tebbal and R.D. Kane, “Critical Issues of Crude Corrosivity in Modern Refineries”, Seventh Middle East Corrosion Conference, NACE International / Bahrain Society of Engineers, Manama, Bahrain, Feb. 1996 (Plenary Lecture).
  199. R.D. Kane and M.S. Cayard, “Characterization and Monitoring of Cracking of Steel Equipment in Wet H2S Service”, Seventh Middle East Corrosion Conference, NACE International / Bahrain Society of Engineers, Manama, Bahrain, Feb. 1996 (Plenary Lecture).
  200. R.D. Kane, “Good Corrosion Control Strategies Maximize Returns”, Petroleum Engineer International, October 1995
  201. R.D. Kane and M.S. Cayard, “Improve Corrosion Control in Refining Processes”, Hydrocarbon Processing, Vol. 74, No. 11,November 1995, pp129-142.
  202. R.D. Kane and M.S. Cayard, “Wet H2S Cracking in Steel Vessels”, Parts I and II, Corrosioneering Journal, Volume 1 Issues 2 and 3, May/June and July/August, 1995
  203. R.D. Kane and D. Abayarathna, “Use of Temperature Scan Testing for Evaluation of CRAs for Oilfield Environments,” CORROSION/95, (Houston, TX:  NACE International, 1995).
  204. R.D. Kane and M.S. Cayard, “Evaluation of Chemical Compatibility of FRP Tubulars with the Split Disk Method,”  CORROSION/95, CORROSION/95, (Houston, TX:  NACE International, 1995).
  205. R.D. Kane, D. Abayarathna and A. Nakamura, “Evaluation of CRA Coated OCTG,”  CORROSION/95, (Houston, TX:  NACE International, 1995).
  206. R.D. Kane and M.S. Cayard, “Options for Mitigation of Internal Corrosion of Offshore Production Systems,”  presented at the Internal Corrosion and Pipe Protection Conference and Exhibition, Houston, TX, 1994.
  207. R.D. Kane, “Benefits of Laboratory Testing in Oilfield Corrosion, Engineering, Trouble Shooting and Materials Selection,” presented at the First NACE Latin American Region Corrosion Congress and First Venezuelan Corrosion Congress, Maracaibo, Venezuela, 1994.
  208. S. Srinivasan and R.D. Kane, “Expert Systems for Assessment of H2S Service Conditions and Materials Selection,” presented at the First NACE Latin American Region Corrosion Congress and First Venezuelan Corrosion Congress, Maracaibo, Venezuela, 1994.
  209. R.D. Kane and M.S. Cayard, “Refinery Corrosion: Critical Issues in Crude Corrosivity, Wet H2S Operations and Amine System,”  presented at the First NACE Latin American Region Corrosion Congress and First Venezuelan Corrosion Congress, Maracaibo, Venezuela, 1994.
  210. R.D. Kane, M.S. Cayard and M. Prager, “Evaluation of Advanced Plate Steels for Resistance to HIC and SOHIC in Wet H2S Environments,”  presented at the Second International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service, Vienna, Austria, 1994.
  211. R.D. Kane and M. Prager, “Characterization of Hydrogen Charging Severity in Simulated Wet H2S Refinery Environments,” presented at the Second International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service, Vienna, Austria, 1994.
  212. M.S. Cayard, R.D. Kane, L. Kaley, G.M. Buchheim & M. Prager, “Evaluation of NDE Techniques for Monitoring Wet H2S cracking in steel vessels,” ,”  presented at the Second International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service, Vienna, Austria, 1994.
  213. R.D. Kane, M.S. Cayard & M. Prager, “Test Procedures for Evaluation of Resistance of Steels to Cracking in Wet H2S Environments,”  presented at the Second International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service, Vienna, Austria, 1994.
  214. R.D. Kane & M. Prager, “New Test Specimen and Methodology for Evaluation of Steels for Resistance to SOHIC,”  presented at the Second International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel and Pipeline Service, Vienna, Austria, 1994.
  215. R.D. Kane, S.M. Wilhelm & P. Eyre, “Galvanic Corrosion Between Ti-Alloy and Steel in CaCl2 Packer Fluids,” CORROSION/94 (Houston, TX:  NACE International, 1994).
  216. R.D. Kane & M.S. Cayard, “High Temperature Corrosion in Industrial Process Environments,” presented at the Symposium on Metallic Corrosion, Merida, Mexico, 1994.
  217. R.D. Kane, “Selection of Materials for Refineries, Petrochemical Plants and Industrial Applications,” presented at the Control de Corrosion, Mexico City, Mexico, 1994.
  218. R.D. Kane & M.S. Cayard, “Corrosion Degradation Mechanisms in Coiled Tubing,” CORROSION/94, Paper no. 68, (Houston, TX: NACE International, 1994).
  219. R.D. Kane & M.S. Cayard, “Test Procedures for Evaluation of Resistance of Steels to Cracking in Wet H2S Environments,” CORROSION/94, paper no. 519, (Houston, TX: NACE International, 1994).
  220. R.D. Kane & S. Mark Wilhelm, “Methods To Combat Liquid Metal Embrittlement In Cryogenic Aluminum Heat Exchangers,” Presented at the 12th International Corrosion Congress for the Corrosion Control for Low-Cost Reliability (Houston, TX September 19-24, 1993).
  221. R.D. Kane & S. Srinivasan, “Development of Safe Use Limits for Martensitic and Duplex Stainless Steels,” presented at the 12th International Corrosion Congress (Houston, TX: NACE International, 1993).
  222. R. Kane & S.M. Wilhelm, “Laboratory Corrosion Tests at High Temperature and High Pressure,”  Standard Technical Practice 1210, ASTM, Philadelphia, PA, 1993.
  223. M.J. Schofield & R.D. Kane, “Corrosion Resistant Alloys for Oilfield Application Selection Criteria Methodology and Options,” CORROSION/93, paper no. 165, (Houston, TX:  NACE International, 1993).
  224. S. Srinivasan & R.D. Kane, “Selection of Martensitic and Duplex Stainless Steels for Oil and Gas Production Service,” CORROSION/92, paper no. 56, (Houston, TX: NACE International, 1992).
  225. S. Srinivasan & R.D. Kane, “Expert Systems for Selection of Materials in Sour Service,” presented at the 72nd Annual GPA Convention, San Antonio, TX, 1993.
  226. R.D. Kane & R.G. Taborelli, “Selecting Alloys to Resist Heat and Corrosion,” Advanced Materials and Processes, ASM, April 1993: pp. 22-28.
  227. R.D. Kane, R.G Asberger & M.S. Cayard, “A Critical Issue in Pipeline Rehabilitation: Implications of Corrosion Induced Damage,” Proceedings of the Fourth European and Middle Eastern Pipeline Rehabilitation Seminar, Abu Dhabi, April 1993.
  228. R.D. Kane, “The Acceptance of Slow Strain Rate Testing Techniques for Environmentally Assisted Cracking,” Standardization News, May 1993: pp. 34-39.
  229. R.D. Kane, “Super Stainless Steels Resist Hostile Environments,” Advanced Materials and Processes, ASM, June 1993.
  230. R.D. Kane, “Laboratory Corrosion Tests at High Temperature and High Production Systems,” Manual on Corrosion Tests and Standards: Application and Interpretation,  (ASTM, 1995).
  231. R.D. Kane, “Options for Mitigation of Internal Corrosion of Offshore Production Systems,” Proceedings of the Engineering Solutions to Industrial Corrosion Problems Conference, (Houston, TX: NACE International, 1993).
  232. R.D. Kane, “Behavior of Corrosion Resistant Alloys in Stimulation Acids, Completion Fluids and Injected Waters,” Proceedings of the Engineering Solutions to Industrial Corrosion Problems Conference, (Houston, TX: NACE International, 1993).
  233. R.D. Kane & S. Srinivasan, “Development of Safe Use Limits for Martensitic and Duplex Stainless Steels,” presented at the 12th International Corrosion Congress, Houston, TX, 1993.
  234. R.D. Kane & S. Srinivasan, “Reliability Assessment of Wet H2S Refinery and Pipeline Equipment:  A Knowledge Based Systems Approach,” presented at the ASME Pressure Vessels & Piping Conference, Symposium on Fitness for Service, New Orleans, LA, 1992.
  235. R.D. Kane & S.M. Wilhelm, “Use of Slow Strain Rate Tests to Evaluate the Embrittlement of Al-alloys and Stainless Steels in Process Environments Containing Mercury,” presented at the Symposium on Slow Strain rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, Pittsburgh, PA, 1992.
  236. R.D. Kane & S.M. Wilhelm, “Industry Standardization Activities in slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking,”  Plenary presentation at the Symposium on Slow Strain rate Testing for the Evaluation of Environmentally Induced Cracking:  Research and Engineering Applications, Pittsburgh, PA, 1992.
  237. R.D. Kane, “Evaluation of Acoustic Emission Response for Liquid Mercury Attack on Aluminum,” Proceedings of CORROSION/92, paper no. 92, (Houston, TX: NACE International, 1992).
  238. S. Srinivasan & R.D. Kane, “Selection of Martensitic and Duplex Stainless Steels for Oil and Gas Service,” Proceedings of CORROSION/92, paper no. 92056, (Houston, TX: NACE International, 1992).
  239. S. Srinivasan & R.D. Kane, “Methods of Data Synthesis in a Rule-Based Representation for Characterization of Corrosion and Cracking in CRAs,” Proceedings of CORROSION/92, paper no. 92267, (Houston, TX: NACE International, 1992).
  240. R.D. Kane, S.M. Wilhelm & W.G. Ashbaugh, “Applications of Laboratory Simulation of Process Corrosion,” Proceedings of CORROSION/92, paper no. 92285, (Houston, TX: NACE International, 1992).
  241. R.D. Kane & M.J. Schofield, “Development and Application of NACE Standard MR0175 for Selection of Sour Service Materials,” Proceedings of Redefining International Standards and Practices, IIR Limited, London, England, March 1992.
  242. R.D. Kane, M.S. Cayard & J.W. Oldfield, “Serviceability of Composite Materials in Commercial Aircraft,”  presented at the Aerospace Corrosion Conference, Amsterdam, Holland, March 1992.
  243. R.D. Kane, “Prevent Corrosion of Advanced Ceramics,”  Chemical Engineering Progress, June 1991:  pp. 77-81.
  244. R.D. Kane, J.P. Ribble & M.J. Schofield, “What’s Behind the Corrosion of Microalloy Steel in Weldments,” Welding Journal, American Welding Society, May 1991:  pp. 56-64.
  245. R.D. Kane, “Impact of Advanced Materials in Chemical Process Applications,”  Plenary presentation at the Symposium on Environmental Effects on Advanced Materials (ADVMAT/91), San Diego, CA, 1991.
  246. R.D. Kane, “Behavior of Titanium Aluminide and Carbon Composite Materials for Hydrogen Gas Service,” presented at the NACE Symposium on Environmental Effects on Advanced Materials (ADVMAT/91), San Diego, CA, 1991.
  247. R.D. Kane, S.M. Wilhelm, T. Yoshida, S. Matsui & T. Iwase, “Analysis of Bimetallic Pipe for Sour Service,” presented at the NACE Symposium on Environmental Effects on Advanced Materials (ADVMAT/91), San Diego, CA, 1991.
  248. R.D. Kane & J. Ribble, “Corrosion of Microalloyed Steel Weldments:  Hydrogen Induced Cracking/Sulfide Stress Cracking,” Proceedings of the International Conference on the Metallurgy, Welding and Qualification of Microalloyed (HSLA) Steel Weldments, (Miami, FL:  American Welding Society, 1990).
  249. R.D. Kane, S.M. Wilhelm & D.R. McIntyre, “Application of the Critical Pitting Temperature Test to the Evaluation of Duplex Stainless Steel,” Corrosion Testing and Evaluation, Eds. R. Baboian and S. Dean, ASTM, STP 1000, 1990:  pp. 289-302.
  250. R.D. Kane,  “Mechanisms of Corrosive Degradation of Engineering Ceramics,” Symposium on Advanced Ceramics for Hostile Environments in the Process Industry, AIChE and Materials Properties Council, Inc., 1990 AIChE Meeting, Chicago, IL, (1990), November.
  251. A.C. Coates & R.D. Kane,  “Corrosion Mitigation Technology for Oil and Gas Pipelines,” presented to the International Pipeline Conference, Ostend, Belgium, 1990.
  252. R.D. Kane & E.A. Chakachery,  “Evaluation of Titanium Aluminide and Carbon Composite Materials for Hydrogen Gas Service,” Proceedings of TMS-AIME Symposium on Environmental Effects on Advanced Materials, Cincinnati, OH, (1990), October.
  253. R.D. Kane & S.M. Wilhelm,  “Analysis of Bimetallic Pipe for Mobile Bay Service,” Proceedings of Offshore Technology Conference, paper no. OTC 6282, (Houston, TX: OTC, 1990).
  254. M.J. Schofield & R.D. Kane,  “Critical Review of Corrosion Test Methods for Duplex Stainless Steels,” Proceedings NACE CORROSION/90, paper no. 572, (Houston, TX: NACE International, 1990).
  255. R.D. Kane, et. al, “Evaluation of Bimetallic Pipe for Oilfield Flowline Service Involving H2S and CO2,” Proceedings NACE CORROSION/90 paper no. 557, (Houston, TX: NACE International, 1990).
  256. S. Srinivasan & R.D. Kane,  “Expert Systems for Materials Selection In Corrosive Environments,” Proceedings for CORROSION/90, paper no. 564, (Houston, TX: NACE International, 1990).
  257. R.D. Kane,  “Environmental Effects on Advanced Materials,” Proceedings of the International Conference on Evaluation of Materials Performance in Severe Environments (EVALMAT 89), Invited Lecturer, Iron and Steel Institute of Japan, Kobe, pp. 305-324, (1989), November.
  258. R.D. Kane & S. Mark Wilhelm,  “Compatibility of Stainless and Nickel Base Alloys in Acidizing Environment,” CORROSION/89, paper no. 481, (Houston, TX: NACE International, 1989).
  259. R.D. Kane, S.M. Wilhelm, & J.W. Oldfield,  “Review of Hydrogen Induced Cracking of Steels in Wet H2S Refinery Service,” International Conference on Interaction of Steels with Hydrogen in Petroleum Industry Pressure Vessel Service, (New York, NY: Materials Properties Council, 1989).
  260. R.D. Kane & J.W. Oldfield,  “Environmental Effects in Advanced Materials,” Aerospace Corrosion Control Conference, (Gleneagles, Scotland: Sawell Publications, 1989).
  261. S.M. Wilhelm & R.D. Kane,  “Status Report: Corrosion Resistant Alloys,” Petroleum Engineering International, March (1987): pp. 36-41.
  262. R.D. Kane & S.M. Wilhelm,  “Slow Strain Rate Testing for Materials Evaluation in High Pressure H2S Environments,” D.R. McIntyre, CORROSION/86, (Houston, TX: NACE International, 1986).  Also published in Corrosion Journal 44, 12(1988): pp. 920-926.
  263. R.D. Kane, S. M. Wilhelm & D.R. McIntyre,  “Application of Corrosion Resistant Alloys in Oilfield Production Environments,” UK CORROSION/85 (Houston, TX: NACE International, 1985).
  264. S.M. Wilhelm & R.D. Kane,  “Selection of Materials for Sour Service in Petroleum Production,” Sour Service in the Oil, Gas, and Petrochemical Industries Conference, London, England, 1985.
  265. A. Hafeex, E.T. Wanderer & R.D. Kane,  “Aluminum Alloys for Use in CO2 Enhanced Oil Recovery (EOR), Systems,” CORROSION/85, paper no. 30, (Houston, TX: NACE International, 1985).
  266. R.D. Kane,  “Corrosion of Stainless Alloys in Oilfield Production Environments,” Proceedings of Stainless Steels ‘84, (1984), September.
  267. J. Booker, W.R. Cribb, J.C. Turn & R.D. Kane,  “Corrosion Behavior of Be-Cu and other Nonmagnetic Alloys in Simulated Drilling Environments,” Proceedings of Stainless Steels ‘84, (1984).
  268. S.M. Wilhelm & R.D. Kane,  “Effect of Heat Treatments and Microstructure on the Corrosion and SCC of Duplex Stainless Steels in H2S/Cl- Environments,” CORROSION/83, paper no. 154, (Houston, TX:  NACE International, 1983).
  269. R.N. Tuttle & R.D. Kane,  “Dialogue:  State-of-the-Art of H2S Corrosion Problem Solving,” Materials Performance, (1983): pp. 9010.
  270. R.D. Kane,  “High Alloy Tubulars Hold Promise for Sour Gas Service,” Petroleum Engineer International, (1983): pp. 98-112.
  271. B.G. Steinberg & R.D. Kane,  “Stepwise Cracking of Line Pipe Steels in Simulated Oilfield Environments,” Proceedings of the Offshore Technology Conference, paper no. OTC 4330, (Houston, TX:  OTC, 1982).
  272. R.D. Kane, B.G. Steinberg, R.D. Mack & W.K. Boyd,  “Oil and Gas Production:  The Impact of Materials Technology,” Inter-American Conference on Materials Technology, October(1981): pp. 389-398.
  273. R.D. Kane and W.K. Boyd, “Use of Titanium and Zirconium in Chemical Environments”, Industrial Applications of Titanium and Zirconium in Chemical Environments, ASTM STP 728, ASTM, West Conshohoken, PA, (1981).
  274. R.D. Kane & W.K. Boyd,  “New Frontiers in Materials for Oil and Gas Production,” Proceedings of Materials for Energy, pp. 83-103, (Miami, FL: American Society for Metals, 1981).
  275. Omar, R.D. Kane & W.K. Boyd,  “Factors Affecting the Sulfide Stress Cracking Resistance of Steel Weldments,” CORROSION/81, paper no. 186, (Houston, TX: NACE International, 1981).
  276. R.D. Kane & W.K. Boyd,  “Materials Technology for Oil and Gas Production,” Metals Progress, February (1981).
  277. R.D. Kane, & W.K. Boyd,  “Factors Affecting the Performance of Linepipe Steels in Sour Service,” Proceedings of Interpipe ‘80, February(1980),: pp. 76-86.
  278. M. Raghavan, B.J. Berkowitz, R.D. Kane, “Transmission Electron Microscopic Investigation of Phase Transformation in MP35N,” Metallurgical Transactions 11A, (1980): pp. 203-207.
  279. R.D. Kane & B.J. Berkowitz,  “Effect of Heat Treatment and Impurities on the Hydrogen Embrittlement of a Nickel Cobalt Base Alloy,” Corrosion 36, 1(1980): pp. 29-36.
  280. R.D. Kane & B.J. Berkowitz,  “The Effect of Impurity Segregation on the Hydrogen Embrittlement of a Nickel Cobalt Base Alloy in H2S Environments,” Corrosion 36, 1(1980): pp. 24-29.
  281. J.J. Burton, B.J. Berkowitz & R.D. Kane,  “Surface Segregation of an Engineering Alloy:  Hastelloy C-276,” Metallurgical Transactions 10A, 6(1979): p 682.
  282. R.D. Kane, J.B. Greer, D.F. Jacobs, H.R. Hanson, B.H. Berkowitz & G.A. Vaughn,  “Stress Corrosion Cracking of Nickel and Cobalt Base Alloys in Chloride Containing Environments,” CORROSION/79, paper no. 174, (Houston, TX:  NACE International, 1979).
  283. R.D. Kane, “Accelerated Hydrogen Charging of Nickel and Cobalt Based Alloys,” Corrosion 34, 12(1978): pp. 442-445.
  284. R.D. Kane and J.B. Greer, “Sulfide Stress Cracking of High Strength Steels in Laboratory and Oilfield Environments,” Journal of Petroleum Technology, November(1977).
  285. R.D. Kane & J.B. Greer, “Embrittlement of High Strength High Alloy Tubular Materials in Sour Environments,” Society of Petroleum Engineers, paper no. SPE 6798, (Warrendale, PA:  AIME, 1977).
  286. R.D. Kane, M. Watkins, D.F. Jacobs & G.L. Hancock, “Factors Influencing the Embrittlement of Cold Worked High Alloy Materials in H2S Environments,” Corrosion 33, 9(1977): pp. 309-320.
  287. Kane, M. Watkins & J. Greer, “The Improvement of Sulfide Stress Cracking Resistance of 12% Chromium Stainless Steels Through Heat Treatment,” Corrosion 33, 7(1977): pp. 231-235.
  288. R.D. Kane & L.J. Ebert, “Creep Deformation of TD-Nickel Chromium,” Metallurgical Transactions, 7A, 1(1976), pp. 133-137.
  289. R.D. Kane & L.J. Ebert, “Deformation and Annealing Response of TD-Nickel Chromium,” Metallurgical Transactions 6A, 7(1975): pp. 1475-1467.
  290. R.D. Kane, J.J. Petrovic & L.J. Ebert, “Metallographic Examination of TD-Nickel Based Alloys,” Metallurgical Transactions 6A, 6(1975).